TDI

SPECIFICATIONS Engine/transmission LandRover 300TDI 2,500cc turbo/intercooled 111hp, 265nm torque with 4 speed automatic gearbox + high/low range and lockable centre differential. Axles Heavy duty, industrial axles with 4 pin, hypoid differentials and epicyclic hub reduction units. Overall ratio 12.15:1. Suspension Extra H.D leaf springs with coil assisters on rear axle and heavy duty shock absorbers on front Steering Hydrostatic power steering with optional electronic four wheel steer. Fully adjustable steering column Turning circle 10m (33ft) centres on LP tyres and on row crops with 68in track and above. 13m on row crops with 60in track. Brakes Servo-assisted, twin line hydraulic system with discs all round. Parking brake Cable operated, disc type transmission brake mounted on rear axle. Cab New isolated quiet cab with carbon filtration / pressurisation and air conditioning as standard. Suspension seat with arm rests and lumbar support. Instrumentation Frazier electronic speed/area meter/function monitor (ICM) combined with RDS automatic sprayer controller Power take off Hydraulic, 6hp with manual speed control and tachometer in cab. Higher powered systems optional. Hydraulics One single acting spool valve and 3 double acting spools fitted as standard, One further spool may be fitted as an option. Carrying capacity 2.75 tonnes (including weight of sprayer/spreader, optional equipment and load). Track widths LP tyres 68in to 78in (pre-set). Row crops 60in to 78in (adjustable). Ground clearance 24 inches under axle tubes (with 9.5x36 row crop wheels) Low pressure tyres 540/45-22.5 Trelleborg Row crop wheels 9.5 x 36, or 9.5 x 40. Other sizes of intermediate wheel on request. Weight (approx) Dependent on specification - Unladen approx 3.5 tonnes (with average spec 24m, alloy boom sprayer). 5.7 tonnes fully laden | Options / Prices | Whats New | | Homepage | Index | The Products | 3D | 4D | 5D | 475 | | Phantom | Stealth | Stealth HC | Special Projects | RTT |