Operating - ICM FRAZIER ICM Introduction The PHANTOM is fitted with a multi-function monitor which displays and monitors all the various functions relating to the engine, ground and PTO speeds, area covered etc. It has various audible and visual warnings built in and links to the sprayer controls, the four wheel steer system (if fitted) and to the air conditioning. It is relatively easy to operate and the majority of the calibration figures are factory preset. In addition to the ICM you may have either an RDS Delta 3 or 4 sprayer controller fitted. The instructions later in this chapter for working out and setting the calibration factors for wheel circumference, can also be used for these units. The additional features of these units are explained in more detail in an accompanying booklet. The calibration factors for all Deltas are normally factory preset, however, it is recommended that the wheel circumference be re-calibrated in field conditions, before using the machine, to ensure accuracy of applications. ICM Functions The ICM will display any of the following information in one or other of the two display windows. Some functions are displayed permanently and some require a button press. The various warning systems are either simple warning lights or may be audible together with a flashing display. All the functions are described in more detail over the following pages. The numbered functions below are indicated on the facing page. Function 1 Engine speed   Engine speed warning   Engine speed warning 2 PTO speed   PTO speed warning 3 Total area 4 Part area   Area cut out 5 Distance travelled 6 Hours worked 7 Reset 8 Metric / Imperial 9 Fuel   Low fuel 10 Ground speed   Ground speed alarm   4WS alarm 11 Temperature gauge   Temperature warning 12 Clock 13 Area override Notes Press to display engine speed in LH window Visual and audible alarms for excessive engine speed Automatic cut out for air conditioning compressor at low engine speeds Press to display PTO speed in LH window Visual and audible alarms for excessive PTO speed Press to display total area covered in LH window Press to display part area covered in LH window Links to sprayer controls to stop acre meter when sprayer switched off Press to display distance travelled in LH window Press to display hours worked in LH window Press to reset either total area, part area, distance or hours worked Press to convert speed and information stored from metric to imperial Permanent display of fuel tank level Audible and visual warning when fuel level drops to approx. 10 litres Permanently displayed in either km/hr or mph Audible and visual alarm if 50 km/hr (30mph) exceeded Audible and visual warning to lock system for roadwork (over 19 km/hr) Permanent display of engine temperature Audible and visual warning for engine overheating Press to display time of day in LH window Press to stop acremeter recording when in auto mode   < 10 >